MyScreen

Diamond Glass edge Full Glue - is a flat tempered glass for devices with slightly rounded screen edges, with an adhesive layer on the entire surface. Most scratch resistant (9H / 8Mohs) Adhesive layer on the entire surface for better touch screen sensitivity and aesthetic appearance of the device An olefobic coating for easier dirt removal Maximum possible screen coverage for full protection Device-colored frame for an original look

The anti-impact film strengthens the screen resistance by up to 5 times. The first TPU film on the market without the orange peel effect and with a self-regeneration function. Small scratches disappear on their own within a maximum of 24 hours. Dedicated to high-end devices with precise screen outline (separate cut-outs for all necessary sensors, speaker, button). up to 5 times stronger screen for flat and rounded screens for the screen, the back and the sides of the device has a self-healing function Dry or wet mounting

Expert Lite - Protective film for flat and rounded screens and a flat part of the body. Glossy, smooth to the touch, perfectly adheres to the surface. Dedicated to devices from the lower shelf and a simplified screen outline. scratch protection for flat and curved screens for flat part of the body dry application

Protection for a curved screenA curved display is a real challenge for film and glass designers. Occasionally, the protection peels off or becomes detached, resulting in weaker protection. The solution? ARC+™ film, designed with the needs of curved screens in mind. It adheres from edge to edge, protecting the entire display.Semi-Wet InstallationWhy did we opt for installation using mounting gel? Firstly, this method will allow you to achieve a perfect result: you can easily install the film, the film adheres perfectly to the device, even at the edges, and does not peel off. You can also easily change the position of the film on the display during installation.150% stronger screenDo you value...

Instructions:1. Using a cloth without "hair", wipe the surface of the device clean.2.Apply the gel to the MyScreenPROTECTOR protective film, the adhesive side and the device.3.Place the protective film on the device with the adhesive side facing the device 4.4.Use the applicator to squeeze out any excess gel from under the protective film.